Fuses

If electrical components in the vehicle are not working, a fuse may have blown. Blown fuses are identified by a broken wire within the fuse. Check the appropriate fuses before replacing any electrical components.

Note: Always replace a fuse with one that has the specified amperage


Note: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire.

Standard fuse amperage rating and color

Passenger compartment fuse panel


    See also:

    Fuel consumption
    The CO2 and fuel consumption figures are derived from laboratory tests according to EEC Directive 80/1268/EEC and subsequent amendments and are carried out by all vehicle manufacturers. They are ...

    Direction indicator/hazard warning flasher relay - renewal
    1 Disconnect the battery negative lead. 2 The relay is located on a bracket above the steering column. Access is gained either by removing the driver’s side lower facia panel or the instrument pan ...

    General information
    CAUTIONS: Use only approved wheel and tyre sizes. Using other sizes could damage the vehicle and will make the National Type Approval invalid. If you change the diameter of the tyres from that f ...