Stopping and securing the vehicle

1. Park on a level surface, set the parking brake and activate hazard flashers.

2. Place gearshift lever in P (Park) (automatic transmission) or R (Reverse) (manual transmission) and turn engine off.

Removing the jack and tools


    See also:

    Exterior lamp bulbs - renewal
    Note: The glass envelopes of the headlamp, auxiliary driving lamp and front foglamp bulbs must not be touched with the fingers. If the glass is accidentally touched, it should be washed with methy ...

    Carburettor (Pierburg 2V type) - removal and refitting
    1 Proceed as described for the Ford VV carburettor but note the following. 2 The Pierburg carburettor is not fitted with an anti-dieselling valve. 3 Disconnect all relevant wiring plugs and vacuu ...

    ISOFIX anchor points
    WARNING: Use an anti-rotation device when using the ISOFIX system. We recommend the use of a top tether or support leg. Your vehicle is fitted with ISOFIX anchor points that accommodate universa ...