Wheel lug nut torque specifications

Retighten the lug nuts to the specified torque within 100 miles (160 km) after any wheel disturbance (tire rotation, changing a flat tire, wheel removal, etc.).

WARNING: When a wheel is installed, always remove any


corrosion, dirt or foreign materials present on the mounting WARNING: When a wheel is installed, always remove any
corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the wheel hub, brake drum or brake disc that contacts the wheel. Ensure that any fasteners that attach the rotor to the hub are secured so they do not interfere with the mounting surfaces of the wheel. Installing wheels without correct metal-to-metal contact at the wheel mounting surfaces can cause the wheel nuts to loosen and the wheel to come off while the vehicle is in motion, resulting in loss of control.

Note: Inspect the wheel pilot bore (1) and mounting surface prior to installation. Remove any visible corrosion or loose particles.

Running out of fuel


    See also:

    Knock sensor - removal and refitting
    Removal 1 The knock sensor is screwed into the cylinder block, near the oil filter (see illustration). 15.1 Knock sensor location - 1.4 CFI engine A Knock sensor B Wiring plug C Securing bolt ...

    Exhaust manifold - removal and refitting
    2.0 litre SOHC models 1 Refer to Chapter 4 Part A, Section 26, but note the following points. 2 Ignore the references to removal and refitting of the air cleaner and hot air pick-up pipe, and not ...

    Manual climate control
    Recommended settings for cooling Open the centre and side air vents. Direct the centre air vents upwards and the side air vents toward the side windows. Recommended settings for heating Clos ...