Waxing

Х Wash the vehicle first.

Х Use a quality wax that does not contain abrasives.

Х Do not allow paint sealant to come in contact with any non-body (low-gloss black) colored trim, such as grained door handles, roof racks, bumpers, side moldings, mirror housings or the windshield cowl area. The paint sealant will УgrayФ or stain the parts over time.

    See also:

    Inspecting safety system components
    Seat belts Belts subjected to strain, as a result of an accident, should be renewed and the anchorages checked by a properly trained technician. ...

    Final drive oil level check (Every 12 000 miles (20 000 km) or 12 months)
    1 Check the final drive oil level as follows. 2 Position the vehicle over a pit, or raise it at front and rear on ramps or axle stands. The vehicle must be level. 3 Wipe clean around the final dri ...

    Ignition system electronic modules - removal and refitting
    Amplifier module - electronic breakerless system Removal 1 The amplifier module is located on the side of the distributor (see illustration). 6.1 Electronic amplifier module locations A Early ...