Normal scheduled maintenance and log

See also:

Sump - removal and refitting
Note: New gaskets and sealing strips must be used on refitting. Removal 1 Disconnect the battery negative lead. 2 Drain the engine oil. 3 Remove the starter motor as described in Chapter 5, Part ...

Load apportioning valve (P100 models) - adjustment
Models before mid-April 1989 1 The vehicle must be unladen, at normal kerb weight (a full tank of petrol, but no driver or load). 2 With the vehicle standing on its roadwheels, remove the spring ...

Programming the remote control
A maximum of eight remote controls (including any supplied with your vehicle) can be programmed. The remote controls must remain inside the vehicle during the programming procedure. Fasten the fro ...