Checking the wiper blades

Run the tip of your fingers over the edge


Run the tip of your fingers over the edge of the blade to check for roughness.

Clean the wiper blade lips with water applied with a soft sponge.

    See also:

    Fuel tank - removal and refitting
    Note: Refer to the warning at the end of Section 1 before proceeding. Removal 1 The fuel tank will normally only need to be removed if it is severely contaminated with sediment or other substance ...

    Fastening the seat belts
    Fastening the seat belts WARNING: Insert the tongue into the buckle until a distinct click is heard, otherwise the seat belt will not be locked correctly. Pull the belt out steadily. It may lo ...

    Power-operated folding roof components - removal and refitting
    Hydraulic rams Removal 1 Remove the rear wheelhouse covers with reference to Section 32. 2 Mark the two hoses connected to the ram as a guide to reassembly, then remove the circlips securing the ...