Changing the wiper blades

Windscreen wiper blades
Windscreen wiper blades

1. Press the locking button.

2. Remove the wiper blade.

Note: Make sure that the wiper blade locks into place.

3. Install in the reverse order.

Rear window wiper blade

1. Lift the wiper arm.

2. Position the wiper blade at right angles


2. Position the wiper blade at right angles to the wiper arm.

3. Disengage the wiper blade from the wiper arm.

4. Remove the wiper blade.

Note: Make sure that the wiper blade locks into place.

5. Install in the reverse order.

    See also:

    Alternator - testing
    Note: To carry out the complete test procedure use only the following test equipment - a 0 to 20 volt moving coil voltmeter, a 0 to 100 amp moving coil ammeter, and a rheostat rated at 30 amps. 1 ...

    Diagram 1. Starting, charging automatic transmission and warning lamps. Models from 1990 onwards
    Diagram 1. Starting, charging automatic transmission and warning lamps. Models from 1990 onwards ...

    Key to wiring diagrams. Models from 1990 onwards
    Key to wiring diagrams. Models from 1990 onwards ...