Removing a headlamp

1. Open the bonnet. See Opening and closing the bonnet.

2. Remove the screws.


2. Remove the screws.

3. Disconnect the electrical connector.


3. Disconnect the electrical connector.

4. Remove the headlamp.

Note: When fitting the headlamp, make sure that you fully engage the headlamp in the retaining clips.

    See also:

    Interior
    Three distinct interior themes are available for the Fusion, which seats up to five occupants. Standard equipment includes a tilt/telescoping steering wheel and a height-adjustable driver's se ...

    Timing chain and sprockets - removal and refitting
    Note: Refer to the warning at the beginning of Section 5 before proceeding. A suitable puller will be required to remove the crankshaft pulley. A new crankshaft pulley bolt, a new timing chain ten ...

    Rear suspension angles - general
    The rear wheel toe and camber angles are set in production and do not require checking under normal service conditions. Of the two, only the toe setting can be adjusted, the camber angle being fix ...