Toll reader

On vehicles with an anti-heat windscreen,


On vehicles with an anti-heat windscreen, toll readers should be placed in the area as shown (all measurements shown in millimetres), otherwise communication performance with toll stations may be reduced.

The toll reader should be placed on the passenger side to prevent the reader from obscuring the driver’s vision (e.g. at traffic lights).

    See also:

    Bluetooth setup
    Before you can use your telephone with your vehicle it must be bonded to the vehicle telephone system. Handling of phones Up to six Bluetooth devices can be bonded to the vehicle system. Note: I ...

    Refuelling
    CAUTION: Do not attempt to start the engine if you have filled the fuel tank with the incorrect fuel. This could damage the engine. Have the system checked by a properly trained technician immedi ...

    Direction indicator and hazard warning flasher switch assembly - renewal
    1 Disconnect the battery negative lead. 2 Remove the securing screws and unclip the lower and upper steering column shrouds. 3 Remove the two securing screws and disconnect the two wiring plugs, t ...