Cruise control

See also:

Crankshaft front oil seal - renewal
Note: A new gasket will be required for refitting if the old seal housing is removed during this procedure. 1 Remove the timing belt and the crankshaft sprocket. 2 If an oil seal removal tool is ...

Weber 2V carburettor - adjustment
Idle speed and mixture adjustment 1 Refer to Chapter 1. Fast idle speed (XR3 models) 2 Remove the air cleaner as described in Section 2. 3 Have the engine at normal operating temperature, with ...

Refuelling
CAUTION: Do not attempt to start the engine if you have filled the fuel tank with the incorrect fuel. This could damage the engine. Have the system checked by a properly trained technician immedi ...