Technical specifications

Vehicle fluids

* You can use an alternative SAE 5W-30 engine oil, providing it meets


* You can use an alternative SAE 5W-30

engine oil, providing it meets the specification
defined by WSS-M2C913-B.

Note: If you operate your vehicle in temperatures below -20°C (-4°F), you must not
use SAE 10W-40 engine oil.

Topping up the oil:

If you are unable to find an oil that meets the specification defined
by WSS-M2C913-B

, you must use SAE 5W-30

(preferred), SAE 5W-40

(except
vehicles with E85 fuel) or SAE 10W-40

that meets the specification defined by either
ACEA A1/B1

(preferred) or ACEA A3/B3

. Using these oils can result in longer engine
cranking periods, reduced engine performance, reduced fuel economy and increased emission levels.

Capacities



Vehicle care


    See also:

    Using MyKey with Remote Start Systems
    MyKey is not compatible with non-Ford approved aftermarket remote start systems. If you choose to install a remote start system please see your authorized dealer for a Ford approved remote start sys ...

    Roof racks and load carriers
    Roof rack WARNINGS: Do not fit a roof rack to vehicles with a convertible top. If you use a roof rack, the fuel consumption of your vehicle will be higher and you may experience different drivi ...

    Starting a diesel engine
    Cold or hot engine All vehicles Note: When the temperature is below -15ºC (5ºF), you may need to crank the engine for up to 25 seconds. If you consistently operate the vehicle in such ...