Using the telephone

Note: Refer to your audio guide for details of the controls. See Audio unit overview.

This chapter describes the phone functions of the audio unit.

An active phone must be present.

Even if connected to the audio unit, your phone can still be used in the usual way.

Note: You can exit the phone menu by pressing any source button CD, RADIO or AUX.

Making a call

Dialling a number using voice control

Phone numbers can be dialled using voice control. See Telephone commands.

Dialling a number using the address book

You can access your phone address book via Bluetooth. The entries will appear in the unit display.

1. Press the PHONE

button.

2. Press the arrow buttons until the phone book is shown.

3. Press the OK

button 4. Press the up/down arrow buttons to select the desired phone number.

Note: Press and hold the up/down arrow buttons to skip to the next number.

5. Press the OK

button to dial the selected phone number.

Dialling a number using the telephone keypad

If you have an audio unit with a telephone keypad (buttons 0-9, * and #):

1. Press the PHONE

button.

2. Dial the number using the telephone keypad on the audio unit.

3. Press the OK

button.

Note: If you enter an incorrect digit whilst entering a phone number, press function button 3 to erase the last digit. A long press will erase the complete string of digits.

Ending a call

Calls can be ended by pressing function button 4.

Audio units without a telephone keypad can also end a call by pressing the MODE

button on the remote control.

Redialling a number

1. Press the PHONE

button.

2. Press the arrow buttons until CALL LISTS

is displayed.

3. Press the OK

button.

Note: If the active phone does not provide a call out list, the last outgoing call number/entry can be redialled.

4. Press the up/down buttons to select the desired call list.

5. Press the OK

button.

6. Press the up/down buttons to select the desired phone number.

7. Press the OK

button.

Redialling the last dialled number

1. Press the PHONE

button.

2. Press the arrow buttons until REDIAL

is displayed.

3. Press the OK

button.

If you have an audio unit with a telephone keypad:
1. Press the PHONE

button.

2. Press the OK

button.

3. Press function button 2.

Receiving an incoming call

Accepting an incoming call

Incoming calls can be accepted by pressing function button 1 or the MODE

button on the remote control.

Rejecting an incoming call

Incoming calls can be rejected by pressing function button 4.

Receiving a second incoming call

Note: The second incoming call function must be activated in your phone.

If there is an incoming call whilst there is an ongoing call, a beep will be heard and you will have the option to end the active call and to accept the incoming call.

Accepting a second incoming call

Note: The first incoming call will be disconnected and replaced by the second incoming call.

Second incoming calls can be accepted by pressing function button 1.

Rejecting a second incoming call

Second incoming calls can be rejected by pressing function button 4.

Muting the microphone

Note: During a call, it is possible to mute the microphone. Whilst muted, confirmation will appear in the display.

Press function button 1. Press the button once again to turn this function off.

Changing the active phone

Note: Phones must be bonded to the system before they can be made active.

Note: After bonding a phone to the system, this becomes the active phone.

1. Press the PHONE

button.

2. Press the up/down buttons until SELECT PHONE

is shown.

3. Press the OK

button.

4. Scroll through the different stored phones by using the up/down buttons to display the bonded phones.

5. Press the OK

button to select the phone which is to be the active phone.

Debonding a bonded phone

A bonded phone can be deleted from the system at any time, unless a phone call is in progress.

1. Press the PHONE

button.

2. Press the up/down buttons until SELECT PHONE

is shown.

3. Press the OK

button.

4. Press function button 1.

    See also:

    Exterior
    The front-drive Escort sedan and ZX2 coupe share a 98.4-inch wheelbase, but the coupe is about an inch longer at 175 inches overall. The coupe’s unique, sportier styling is aimed at a younger audi ...

    Using snow chains
    WARNINGS: Do not exceed 50 km/h (30 mph). Do not use snow chains on snow-free roads. Only fit snow chains to specified tyres. See Technical specifications. CAUTION: If your vehicle is fitted ...

    Radio/cassette player - removal and refitting
    Standard fixing 1 Disconnect the battery negative lead. 2 Pull off the two control knob assemblies. 3 Release the trim panel by unscrewing the two securing nuts from the control spindles. Remove ...