ISOFIX anchor points

WARNINGS:
Use only ISOFIX child seats we recommend.

Use an anti-rotation device when using the ISOFIX system. We recommend the use of a top tether or support leg.

When you are using a child seat with a support leg, remove the storage compartment cover and extend the leg to the base of the compartment.

The ISOFIX system comprises of two rigid attachment arms on the child restraint that attach to anchor points on the rear seats, where the cushion and backrest meet. Tether anchor points may also be fitted.

If you want to use the ISOFIX anchor points, see your dealer.

Attaching a child seat with top tethers


Attaching a child seat with top tethers

WARNING:
Do not attach a tether strap to anything other than the correct tether anchor point.

Route the tether strap to the anchor point.


Route the tether strap to the anchor point.

Tighten the tether strap in line with the child seat manufacturer's instructions.

    See also:

    Throttle housing - removal and refitting
    Note: A new gasket must be used on refitting. Removal 1 Disconnect the battery negative lead. 2 Depressurise the fuel system as described in Section 6. 3 Remove the air inlet pipe (see illustrati ...

    Manual steering gear - removal and refitting
    Note: A balljoint separator tool will be required for this operation. Removal 1 Set the front wheels in the straight-ahead position. Ensure that the steering lock is engaged and remove the igniti ...

    Windscreen/tailgate wiper blades and arms - removal and refitting
    Removal 1 Pull the wiper arm away from the glass until the arm locks. 2 Depress the small clip on the blade and slide the blade out of the hooked part of the arm (see illustration). 17.2 Disco ...