See also:

Rear suspension angles - general
The rear wheel toe and camber angles are set in production and do not require checking under normal service conditions. Of the two, only the toe setting can be adjusted, the camber angle being fix ...

Engine/automatic transmission assembly - reconnection and refitting
1 Reverse the removal procedure described in Section 12, noting the following points. 2 Check that the engine adapter plate is correctly positioned on its locating dowels. 3 As the torque converte ...

Radiator grille panel - removal and refitting
Models up to 1987 1 With the bonnet raised, remove the four grille panel securing screws from the top of the front panel. 2 Lift the grille panel from its lower mounting bushes, and withdraw it f ...