Removing a headlamp

WARNING:
Have Xenon bulbs changed by a trained technician. There is a risk of electric shock.

1. Open the bonnet. See Opening and closing the bonnet.

2. Remove the screw.


2. Remove the screw.

3. Release the retaining clips.


3. Release the retaining clips.

4. Disconnect the electrical connector.

5. Remove the headlamp.

Note: When fitting the headlamp, make sure that you fully engage the headlamp in the retaining clips.

    See also:

    Engine dismantling, examination, renovation and reassembly - general information
    1.8 litre (R2A type) Dismantling 1 It is best to mount the engine on a dismantling stand, but if this is not available, stand the engine on a strong bench at a comfortable working height. Failing ...

    Using seat belts during pregnancy
    Using seat belts during pregnancy WARNING: Position the seat belt correctly for your safety and that of your unborn child. Do not use only the lap strap or the shoulder strap. Position the lap ...

    Fuel vapour separator (models from 1985) - removal and refitting
    Caution: Refer to the precautions in Section 1 before proceeding. Removal 1 On SOHC models, the vapour separator is located on the left-hand side of the engine compartment. On CVH models, the va ...