General information

WARNING:
Do not operate the information display controls when the vehicle is moving.

Note: The information display will remain on for several minutes after you switch off the ignition.

Various systems on your vehicle can be controlled using the multi-function lever on the steering column. Corresponding information is displayed in the information display.

For detailed instructions on navigation, refer to the appropriate manual.

Controls
Controls

Use the rotary control:

Type 2 and 3

Х to scroll through the trip computer displays.

Х to scroll through and highlight the options within a menu.

Note: To scroll automatically, hold the rotary control in the upward or downward position.

Press the SET/RESET button to:


Press the SET/RESET button to: Х enter the main menu from the trip computer displays.

Х enter a sub-menu.

Х exit a menu.

Х choose and confirm a setting.

Note: If the chimes are activated, a short tone will sound each time the button is pressed.

Menu structure


Trip computerTrip computer


    See also:

    Disarming the alarm
    Vehicles without keyless entry Perimeter alarm Disarm and silence the alarm by unlocking the doors with the key and switching the ignition on with a correctly coded key, or unlocking the doors or ...

    Auxiliary air device - removal and refitting
    K-Jetronic system Removal 1 Disconnect the battery earth lead. 2 Disconnect the wiring multi-plug and the two air hoses from the device which is located beneath the cold start valve (see illustra ...

    Arming the engine immobiliser
    The engine immobiliser is armed automatically a short time after you have switched the ignition off. ...