Trip computer

Type 2 and 3

Odometer

Registers the total mileage of the vehicle.

Tripmeter

Registers the mileage of individual journeys.

Distance to empty

Indicates the approximate distance the vehicle will travel on the fuel remaining in the tank. Changes in driving pattern may cause the value to vary.

Instantaneous fuel consumption

Indicates the current average fuel consumption.

Average fuel consumption

Indicates the average fuel consumption since the function was last reset.

Average speed

Indicates the average speed calculated since the function was last reset.

Outside air temperature

Shows the outside air temperature.

Hold 'SET' to set Tyre Pres.

Recalibrates the system to the actual pressure of the tyres.

Menu

Enters the main menu. See General information.

Trip computer A
Trip computer A
Odometer B
Tripmeter C

The trip computer includes the following information displays:

Turn the rotary control to scroll through


Turn the rotary control to scroll through the trip computer displays.

Note: The position of the trip computer display may vary depending on the information shown in the display.

Resetting the trip computer using the main menu

To reset a particular display: 1. Turn the rotary control and highlight Menu.

2. Press the SET/RESET button.

3. Highlight "Reset Trip".

4. Press the SET/RESET button.

5. Highlight the function to be reset.

6. Press and hold the SET/RESET button.

    See also:

    Ignition system component check (Every 24 000 miles (40 000 km) or 2 years)
    1 Before disturbing any part of the ignition system, disconnect the battery negative lead. 2 Identify and clearly mark all HT leads before disconnecting them from the spark plugs. 3 Refer to the a ...

    Initial start-up after overhaul or major repair
    1 Make a final check to ensure that everything has been reconnected to the engine and that no rags or tools have been left in the engine bay. 2 Check that oil and coolant levels are correct. 3 S ...

    Heated seats
    Driver side Passenger side CAUTION: Operating the heated seats with the engine off will drain the battery. The heated seats will operate when the ignition switch is in position II. ...