Manual seats

Moving the seats backwards and forwards
Moving the seats backwards and forwards

WARNING:
Rock the seat backwards and forwards after releasing the lever to make sure that it is fully engaged in its catch.

Adjusting the lumbar support
Adjusting the lumbar support

Adjusting the height of the drivers seat
Adjusting the height of the drivers seat

Adjusting the angle of the seatback
Adjusting the angle of the seatback

    See also:

    Auxiliary power sockets
    CAUTION: If you use the socket when the engine is not running, the battery may discharge. Note: You can use the socket to power 12 volt appliances that have a maximum current rating of 10 Ampere ...

    Load apportioning valve P100 models) - removal and refitting
    Caution: Refer to the precautions in Section 1. Removal 1 Chock the front wheels, jack up the rear of the vehicle and support on axle stands (see Jacking and Vehicle Support). 2 The load appor ...

    Idle speed control valve - removal and refitting
    Note: A new gasket must be used when refitting the valve. 2.0 litre SOHC models 1 Disconnect the battery negative lead. 2 Disconnect the idle speed control valve wiring plug by releasing the reta ...