Auxiliary power sockets

CAUTION:
If you use the socket when the engine is not running, the battery may discharge.

Note: You can use the socket to power 12 volt appliances that have a maximum current rating of 10 Amperes. Use only Ford accessory connectors or connectors specified for use with SAE standard sockets.

Auxiliary power sockets are located in the


Auxiliary power sockets are located in the centre console and in the luggage compartment.

Power inverter

CAUTIONS:
If you use the socket when the engine is not running, the battery may discharge.

If the LED flashes continuously, re-insert the plug or switch the ignition off and then on again.

It will switch off if the temperature is above 85°C (185°F). The LED will flash once. When it has cooled down it will switch back on automatically.

Do not exceed the maximum power output. If you do, the LED will flash twice. Remove the plug and re-insert it.

CAUTIONS:
If the LED flashes 3 or 4 times, have the system checked by a properly trained technician.

Note: You can use the socket to power 230 volt appliances that have a maximum rating of 150 watts.

Centre console


    See also:

    Roof racks and load carriers
    Roof rack WARNINGS: If you use a roof rack, the fuel consumption of your vehicle will be higher and you may experience different driving characteristics. Read and follow the manufacturer’s inst ...

    Refuelling
    CAUTION: Do not attempt to start the engine if you have filled the fuel tank with the incorrect fuel. This could damage the engine. Have the system checked by a properly trained technician immedi ...

    Major operations requiring engine removal
    The following work can only be carried out after removal of the engine from the car: a) Crankshaft main bearings - renewal. b) Crankshaft - removal and refitting. c) Flywheel - removal and refitti ...