Centre console

Rear seat centre console

Installing the rear seat centre console

WARNING:
Close the lid of the console before installing it.

1. Fold up the rear centre seat. See Rear seats.

2. Place the console onto the storage


2. Place the console onto the storage tray between the outboard seats.

3. Slide the guide arm at the rear of the console under the bar on the tray.

4. Push the console rearwards and down


4. Push the console rearwards and down at the front until it clicks into position.

5. Slide the outboard seats rearwards.

Removing the rear seat centre console

WARNING:
Close the lid of the console before removing it.

1. Press the locking handle under the


1. Press the locking handle under the front of the console.

2. Pull the console up at the front edge and lift it out.

    See also:

    Inlet manifold - removal and refitting
    Caution: Refer to the precautions in Section 1 before proceeding. Note: A tachometer and an exhaust gas analyser will be required to check the idle mixture on completion. A new gasket must be us ...

    Steering column lock - removal and refitting
    Note: For ignition switch removal see Chapter 5. A new shear-bolt will be required on refitting. Removal 1 To remove the ignition switch/column lock, the shear-head bolt must be drilled out. 2 A ...

    Cold weather precautions
    The functional operation of some components and systems can be affected at temperatures below -30°C (-22°F). ...