Satellite navigation unit holder

Fitting the navigation unit
Fitting the navigation unit

Insert the navigation unit into the holder until you hear a distinct click.

Adjusting the holder
Adjusting the holder

1. Unlock.

2. Adjust the holder to the desired position.

3. Lock.

Note: Make sure that the navigation unit holder is locked in position.

Removing the navigation unit
Removing the navigation unit

    See also:

    Dog guard
    CAUTION: Keep a distance of at least one centimetre between the dog guard and the seats in front of it. Installing behind the front seats 1. Push the ends of the bar on the grille towards each ...

    Front suspension strut - removal, overhaul and refitting
    Removal 1 Slacken the roadwheel bolts, raise the front of the vehicle and support it securely on stands (see “Jacking and Vehicle Support”), then remove the roadwheel. 2 Support the underside of ...

    Rear window wiper motor - removal and refitting
    Hatchback models 1 Disconnect the battery negative lead. 2 Remove the wiper arm. 3 Open the tailgate; remove the trim panel. 4 Unscrew the earth lead and disconnect the wiring plug from the motor ...