Floor mats

WARNING:
When using the floor mats, always make sure the floor mat is properly secured using the appropriate fixings and positioned so that it does not interfere with the operation of the pedals.

    See also:

    Temperature gauge sender removal and refitting
    Removal 1 On SOHC models, the temperature gauge sender is located on the front left-hand side of the cylinder head, just in front of the inlet manifold. On CVH models, the sender is located on th ...

    Windscreen wiper motor and linkage - removal and refitting
    Removal 1 Disconnect the battery negative lead. 2 Remove the wiper arms. 3 Remove the windscreen cowl panel. 4 Disconnect the wiring plug from the motor. 5 Remove the seven securing screws, and ...

    Starting a diesel engine
    Cold or hot engine All vehicles Note: When the temperature is below -15ºC (5ºF), you may need to crank the engine for up to 25 seconds. If you consistently operate the vehicle in such ...