Fuel quality - Petrol
Note: We recommend that you use only high quality fuel without additives or other engine treatments.
CAUTION:
Do not use leaded petrol or petrol
with additives containing other
metallic compounds (e.g.
manganese-based). They could damage the emission system.
Use minimum 95 octane unleaded petrol that meets the specification defined by EN 228, or equivalent.
See also:
Engine - refitting (automatic transmission in vehicle)
1 Reverse the procedure described in
Section 9, noting the following points.
2 Check that the engine adapter plate is
correctly positioned on its locating dowels.
3 As the torque converter is only ...
Fuel tank - removal and refitting
The procedures are the same as described
in Part A of this Chapter for carburettor
engines, but in addition disconnect the fuel
tank-to-fuel pump hose from the rear face of
the tank. ...
Engine/manual gearbox assembly - removal and separation
Note: Refer to the warning at the beginning of
Section 5 before proceeding. A suitable hoist
and lifting tackle will be required for this
operation.
Removal
1 Proceed as described in paragraphs 1 ...