Fuel cut-off switch

Vehicles with a Duratec engine
Vehicles with a Duratec engine

The fuel supply may be cut off as a result of an accident or sudden vibrations (e.g.

collision when parking).

The switch is located in the side panel in front of the driver's door.

Resetting the switch

WARNING:
Do not reset the fuel cut-off switch if you see or smell leaking fuel.

Х Turn the ignition switch to position 0.

Х Check fuel system for leaks.

Х If no fuel leak is apparent, reset the switch by pushing in the button (see illustration).

Х Turn the ignition switch to position II.

After a few seconds return the key to position I.

Х Make a further check for leaks in the fuel system.

    See also:

    Tailgate wiper motor - removal and refitting
    Removal 1 Disconnect the battery and remove the wiper arm/blade assembly. 2 Remove the pivot shaft nut, spacer and outer seals. 3 Open the tailgate and remove the trim panel (refer to Chapter 11 ...

    Programming MyKey Optional Settings
    Turn the ignition on using an admin key. To program the optional settings, use the message center buttons to do the following: 1. Press SETUP until RESET FOR MYKEY SETTINGS is displayed. 2. Press ...

    Intelligent Oil Life MonitorЩ
    Your vehicle is equipped with an Intelligent Oil Life MonitorЩ that determines when the engine oil should be changed based on how your vehicles is used. By using several important factors in its cal ...