Maintenance

See also:

Front suspension lower arm (pressed steel type) - removal, overhaul and refitting
1 The pressed steel type suspension is only fitted to pre-May 1983 1.1 litre models (see illustration). 4.1 Pressed steel type lower arm components A Lower arm B Tie-bar C Retaining bolt D Ba ...

Fuel filter renewal - fuel injection engines (Every 24 000 miles or 2 Years)
Warning: This procedure may result in some fuel spillage. Before carrying out any operation on the fuel system refer to the precautions given in Safety First! at the beginning of this manual and ...

Courtesy lamp switch - renewal
1 Disconnect the battery negative lead. 2 Open the door and remove the switch securing screw. 3 Withdraw the switch from the door pillar and pull the wiring out sufficiently to prevent it from sp ...