Cleaning the interior

Seat belts

WARNINGS:
Do not use abrasives, or chemical solvents to clean them.

Do not allow moisture to penetrate the seat belt retractor mechanism.

Clean the seat belts with interior cleaner or water applied with a soft sponge. Let the seat belts dry naturally, away from artificial heat.

Instrument cluster screens, LCD screens, radio screens

WARNING:
Do not use abrasives, alcoholic solvents or chemical solvents to clean them.

    See also:

    Front disc caliper - removal, overhaul and refitting
    Caution: Refer to the precautions in Section 1. Removal 1 Apply the handbrake, loosen the relevant roadwheel nuts, then jack up the front of the vehicle and support on axle stands. (see “Jacking ...

    Pistons and connecting rods - removal and refitting
    1.8 litre (R2A type) Removal 1 With the engine removed from the vehicle, remove the sump and the cylinder head. 2 Check the big-end caps for identification marks and if necessary use a centre-pun ...

    How does the airbag supplemental restraint system work?
    The airbag SRS is designed to activate when the vehicle sustains a longitudinal deceleration sufficient to cause the airbag sensors to close an electrical circuit that initiates airbag inflation. ...