Connecting an external device - Vehicles With: Bluetooth

Connecting a Bluetooth audio device

CAUTION:
As various standards exist, manufacturers are able to implement a variety of profiles in their Bluetooth devices. Because of this, an incompatibility can occur between the Bluetooth device and the system, which in some cases may limit system functionality. To avoid this situation, only recommended devices should be used.

Please visit the website www.ford-mobile-connectivity.com for full details.

Bonding the device

Note: Some audio and navigation units have a separate Bluetooth audio menu.

Use this to access setup and control.

To connect the device to the system follow the same procedure as for Bluetooth hands free phones. See Bluetooth setup.

Operating the device

Select Bluetooth audio as the active source.

Tracks can be accessed by skipping forwards and backwards using the steering wheel controls, or directly from the audio unit controls.

    See also:

    Windscreen washers
    Windscreen washers WARNING: Do not operate the washer for more than 10 seconds at a time, and never when the reservoir is empty. While the button at the end of the lever is pressed the washer ...

    Autolamps
    Note: If you have switched autolamps on, you can only switch the main beam on when autolamps has switched the headlamps on. The headlamps will come on and go off automatically depending on the ...

    Brake and clutch fluid check
    WARNINGS: Do not allow the fluid to touch your skin or eyes. If this happens, rinse the affected areas immediately with plenty of water and contact your doctor. If the level is at the MIN mark, h ...