Carburettor fuel system
The fuel system on all models with carburettor induction is composed of a centrally mounted fuel tank, a fuel pump, a carburettor and an air cleaner.
The fuel tank is mounted under the floor pan beneath the rear seats. The tank is ventilated, has a simple filler pipe and a fuel gauge sender unit.
See also:
Trip computer components - removal and refitting
1 Disconnect the battery negative lead
Computer module
2 Remove the single screw from the top edge
of the facia panel in which the module is
housed, then withdraw the facia panel.
3 Remove the fo ...
Bonnet lock - removal and refitting
Removal
1 Extract the three securing screws from the
lock and lower it until the cable can be
disconnected.
2 Withdraw the lock from below the top rail.
Refitting
3 Refit by reversing the remova ...
Cylinder head - dismantling and reassembly
Note: A valve spring compressor will be
required during this procedure. New valve
stem oil seals should be used on
reassembly.
1.8 litre (R2A type)
Dismantling
1 With the cylinder head removed, ...
