Throttle cable - adjustment, removal and refitting
Adjustment The procedure is the same as described in Part A of this Chapter for carburettor engines, except that the cable adjuster is situated in a bracket alongside the throttle housing.
Removal and refitting
The procedure is the same as described in
Part A of this Chapter for carburettor engines,
except that it is not necessary to remove the
air cleaner, and the location of the mounting
bracket is alongside the throttle housing.
See also:
Carburettor fuel system
The fuel system on all models with carburettor induction is
composed of a centrally mounted fuel tank, a fuel pump, a carburettor and an air
cleaner.
The fuel tank is mounted under the floor pan ...
General information and precautions
Contact breaker ignition system
The ignition system is divided into two
circuits, low tension (primary) and high tension
(secondary). The low tension circuit consists of
the battery, ignition swit ...
Rear seat catch - removal and refitting
Saloon models
1 Working in the luggage compartment,
release the seat catch by pulling the release
knob, or if the cable is broken, use a
screwdriver to release the catch itself.
2 Fold the backre ...