Accelerator pedal - removal and refitting
The procedure is the same as described in Part A of this Chapter for carburettor models.
See also:
Engine/manual gearbox assembly - reconnection and refitting
1 Reverse the procedure described in Section
11, noting the following points.
2 Before attempting to reconnect the engine
to the gearbox, check that the clutch friction
disc is centralised. This i ...
Weber 2V carburettor - removal and refitting
Note: Refer to the warning at the end of
Section 1 before proceeding.
XR3 models
Removal
1 Disconnect the battery negative lead.
2 Remove the air cleaner as described in
Section 2.
3 Disconnect ...
Specifications
System type . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . Diagonally split dual circuit, hydraulic with
pressure regulating
valve to rear brakes. Servo ass ...
