Air cleaner - removal and refitting
The procedure is similar to that described in Part A of this Chapter for carburettor engines.
See also:
Tailgate wiper motor - removal and refitting
Removal
1 Disconnect the battery and remove the
wiper arm/blade assembly.
2 Remove the pivot shaft nut, spacer and
outer seals.
3 Open the tailgate and remove the trim panel
(refer to Chapter 11 ...
Alternator brushes and regulator - renewal
Bosch alternator
1 With the alternator removed from the
engine, clean the external surfaces free from
dirt.
2 Extract the brush box/regulator screws
from the rear cover and withdraw the brush
bo ...
Engine dismantling, examination, renovation and reassembly - general
information
Dismantling
1 Refer to Chapter 2, Part A, Section 18,
paragraphs 1 to 8 inclusive.
2 A suitable selection of splined and Torx
sockets will be required to remove many of
the bolts when dismantling ...