Accelerator pedal - removal and refitting
The procedure is the same as described in Part A of this Chapter for carburettor models.
See also:
Cooling, heating and ventilation systems
The cooling system is of the pressurised pump-assisted thermo-syphon
type. The system consists of the radiator, water pump, thermostat, electric
cooling fan, expansion tank and associated hoses. ...
Heater unit - overhaul
1 With the heater unit removed from the
vehicle, remove the two securing screws and
withdraw the heater matrix from the casing
(see illustrations).
19.1a Remove the securing screws . . .
19.1 ...
Fuel filler flap - removal and refitting
Removal
1 Open the filler flap and the tailgate or boot
lid, as applicable.
2 Remove the fuel filler cap and then remove
the screw securing the filler housing to the
fuel tank neck (see illustrat ...