Fuel pump - removal and refitting
Removal
1 The fuel pump is integral with the fuel level
sender unit in the fuel tank (see illustration).
7.1 Integral fuel level sender unit/fuel pump - 1.4 CFI engine
A Fuel pump B Sender unit
2 Chock the front wheels, then jack up the rear of the vehicle and support it securely on axle stands (see “Jacking and Vehicle Support”).
3 Disconnect the battery negative lead.
4 Depressurise the fuel system (Section 6).
5 Remove the fuel tank, then proceed as described for fuel level sender unit removal and refitting. This is described as part of the fuel tank removal and refitting procedure in Part A of this Chapter.
Refitting
6 Refitting is a reversal of removal.
See also:
Engine - refitting (manual gearbox in vehicle)
1 Reverse the procedure described in
paragraphs 1 to 40, Section 5, noting the
following points.
2 Before attempting to refit the engine, check
that the clutch friction disc is centralised.
3 Che ...
Piston/connecting rod assemblies - removal and refitting
Note: A piston ring compressor tool will be
required for this operation.
Removal
1 Remove the cylinder head and the sump as
described in Sections 4 and 5 respectively. Do
not remove the oil pick- ...
Fuel pump (2.0 litre SOHC) - removal and refitting
Caution: Refer to the
precautions in Section 1 before
proceeding.
Removal
1 The fuel pump is located under the rear of
the vehicle next to the fuel tank (see
illustration).
8.1 Fuel pump loca ...