Mixture (CO) adjustment potentiometer - removal and refitting
Removal
1 The potentiometer is located on the side of
the left-hand suspension turret (see
illustration).
17.1 Mixture (CO) adjustment potentiometer (arrowed) - 1.6 EFI engine
2 Disconnect the battery negative lead.
3 Disconnect the potentiometer wiring plug.
4 Remove the securing screw and withdraw the potentiometer.
Refitting
5 Refitting is a reversal of removal, but on
completion check and if necessary adjust the
mixture as described earlier in this Chapter 1.
See also:
Sump - removal and refitting
Note: New gaskets and sealing strips must be
used on refitting.
Removal
1 Disconnect the battery negative lead and
drain the engine oil (see Chapter 1).
2 Refer to Chapter 5, Part A and remove th ...
Steering wheel - removal and refitting
Removal
1 Set the front wheels in the straight-ahead
position.
2 Prise the trim insert from the centre of the
steering wheel, and where applicable,
disconnect the horn electrical lead(s) (see
il ...
Centre console - removal and refitting
Models up to 1990
Full length console
1 Where applicable, prise the electric window
switches from the front upper console panel
and disconnect the wiring.
2 Remove the three securing screws from ...