Manifolds, exhaust and emission control systems
All models utilise a light alloy inlet manifold which on carburettor models is coolant heated to improve the atomisation of the fuel/air mixture.
The exhaust manifold is of cast iron construction and incorporates a heated air box as part of the air inlet system on carburettor models.
See also:
Air cleaner element renewal (Every 24 000 miles (40 000 km) or 2 years)
Carburettor models
1 Remove the screws from the top of the air
cleaner cover (see illustration).
38.1 Remove the air cleaner cover screws . . .
2 Where applicable release the spring clips
aroun ...
General information
All models utilise a light alloy inlet manifold
which on carburettor models is coolant
heated to improve the atomisation of the
fuel/air mixture.
The exhaust manifold is of cast iron
construction ...
Battery - removal and refitting
Note: Refer to the precautions at the end of
Section 1 before proceeding.
Removal
1 The battery is located on the left-hand side
of the engine compartment on a bulkhead
platform.
2 Disconnect th ...
