Specifications
Fuel evaporative emission control system - carburettor engines Ported vacuum switch operating temperature: Two-port valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 to 55°C (125 to 131°F) Three-port valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 to 55°C (125 to 131°F)
See also:
Fuel system (1.6 and 1.8 litre (R6A type) CVH) - depressurisation
Remember to depressurise the
fuel system before loosening any
connections.
Refer to the precautions in
Section 1 before proceeding. The fuel
system will remain pressurised after the
engine is sw ...
Ignition system electronic modules - removal and refitting
Amplifier module - electronic
breakerless system
Removal
1 The amplifier module is located on the side
of the distributor (see illustration).
6.1 Electronic amplifier module locations
A Early ...
Headlamp wiper motor - removal and refitting
Note: On vehicles fitted with foglamps, the
headlamp unit must be removed when the righthand
headlamp wiper motor is to be removed.
Removal
1 Disconnect the battery negative lead.
2 Disconnect th ...
