Battery - removal and refitting
Note: Refer to the precautions at the end of Section 1 before proceeding.
Removal
1 The battery is located on the left-hand side
of the engine compartment on a bulkhead
platform.
2 Disconnect the leads at the negative (earth) terminal by undoing the retaining nut and removing the bolt. Disconnect the positive terminal leads in the same way.
3 Undo the bolts securing the two battery clamps and remove the clamps.
4 Lift the battery from its location, keeping it in an upright position to avoid spilling electrolyte on the paintwork.
Refitting
5 Refitting is the reverse sequence to removal.
Smear petroleum jelly on the terminals when refitting and always connect the positive lead first and the negative lead last.
See also:
Cylinder head and pistons - decarbonising
OHV engines
1 With the cylinder head removed (Section 4),
the carbon deposits should be removed from
the combustion spaces using a scraper and a
wire brush fitted into an electric drill. Take care ...
Air cleaner - removal and refitting
The procedure is similar to that described in
Part B of this Chapter for models with
mechanical fuel injection. ...
Engine/automatic transmission assembly - reconnection and refitting
1 Reverse the procedure described in Section
11, noting the following points.
2 Check that the engine adapter plate is
correctly positioned on its locating dowels.
3 As the torque converter is onl ...