Specifications

General
System type:
1.1 litre OHV engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical contact breaker and coil 1.1 litre CVH engines up to 1986 . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical contact breaker and coil 1.1 litre CVH engines from 1986 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electronic breakerless ignition 1.1 litre HCS engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Distributorless ignition system (DIS/ESC) 1.3 litre OHV engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electronic breakerless ignition 1.3 litre CVH engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electronic breakerless ignition 1.3 litre HCS engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Distributorless ignition system (DIS/ESC) 1.4 litre carburettor engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electronic breakerless ignition 1.4 litre fuel injection engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Programmed electronic ignition (EEC IV) 1.6 litre carburettor engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electronic breakerless ignition 1.6 litre K-Jetronic fuel injection engines . . . . . . . . . . . . . . . . . . . . . . Electronic breakerless ignition 1.6 litre Electronic Fuel Injection (EFI) engines . . . . . . . . . . . . . . . . . . Distributorless ignition system (DIS/EEC IV) 1.6 litre RS Turbo engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Programmed electronic ignition (ESC II) Location of number No 1 cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Crankshaft pulley end Firing order:
OHV and HCS engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2-4-3
CVH engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3-4-2 Spark plugs
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Chapter 1 Specifications Distributor
Direction of rotor arm rotation (all engines) . . . . . . . . . . . . . . . . . . . . . . Anti-clockwise viewed from cap Contact breaker points gap: Bosch distributor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.40 to 0.50 mm (0.016 to 0.020 in) Lucas distributor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.40 to 0.59 mm (0.016 to 0.023 in) Dwell angle (contact breaker system) . . . . . . . . . . . . . . . . . . . . . . . . . . . 48° to 52°
Ignition coil - contact breaker ignition system Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Low voltage for use with 1.5 ohm ballast resistance Output:
OHV engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23.0 k volt (minimum) CVH engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25.0 k volt (minimum) Primary resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 to 1.4 ohms Secondary resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5000 to 9000 ohms Ignition coil - electronic ignition systems (except DIS) Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Oil filled high output Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25.0 to 30.0 k volt according to application Primary resistance:
All models except RS Turbo 1986 onwards . . . . . . . . . . . . . . . . . . . . 0.72 to 0.88 ohms
RS Turbo from 1986 onwards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0 to 1.2 ohms
Secondary resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4500 to 7000 ohms Ignition coil - DIS
Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 k volt (minimum) open circuit Primary resistance (measured at coil): 1.1 and 1.3 litre HCS engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.50 to 1.00 ohm 1.6 litre Electronic Fuel Injection engines . . . . . . . . . . . . . . . . . . . . . . 4.5 to 5.0 ohms
HT leads
Resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 000 ohms maximum per lead (typical value) Type:
OHV engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Champion CLS 8 CVH engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Champion CLS 9 Torque wrench settings Nm lbf ft Spark plugs:
OHV and HCS engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 to 20 10 to 15 CVH engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 to 38 18 to 28 Distributor clamp pinch bolt (OHV engines) . . . . . . . . . . . . . . . . . . . . . . 4 3
Distributor clamp plate bolt (OHV engines) . . . . . . . . . . . . . . . . . . . . . . 10 7
Distributor mounting bolts (CVH engines) . . . . . . . . . . . . . . . . . . . . . . . 7 5

    See also:

    Pistons and connecting rods - removal and refitting
    1.8 litre (R2A type) Removal 1 With the engine removed from the vehicle, remove the sump and the cylinder head. 2 Check the big-end caps for identification marks and if necessary use a centre-pun ...

    Vacuum servo unit and linkage - removal and refitting
    Removal 1 Refer to Section 12 and remove the master cylinder. 2 On fuel-injection models unclip and lift out the front section of the heater plenum chamber to provide access to the connecting li ...

    Cylinder head - removal and refitting (engine removed)
    Note: Up to early 1984, splined type cylinder head bolts were used, and from early 1984, size T55 Torx bolts were used. Torx type bolts must always be renewed after slackening. The two types of bo ...