Brake drum - inspection and renewal
Note: Before starting work, refer to the note at the beginning of Section 2 concerning the dangers of asbestos dust.
1 Whenever a brake drum is removed, brush out dust from it, taking care not to inhale it as it contains asbestos and is injurious to health.
2 Examine the internal friction surface of the drum. If deeply scored, or so worn that the drum has become pocketed to the width of the shoes, then the drums must be renewed.
3 Regrinding is not recommended as the internal diameter will no longer be compatible with the shoe lining contact diameter.
See also:
Specifications
General
Engine type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . Four-cylinder, in-line overhead camshaft
Capacity:
1.1 litre . . . . . . . . . . ...
Carburettor overhaul - general information
Faults with the carburettor are usually
associated with dirt entering the float
chamber and blocking the jets, causing a
weak mixture or power failure within a certain
engine speed range. If this ...
Air cleaner air temperature control - description and testing
Thermostatically-controlled air
cleaner
1 On all pre-1986 models and certain models
from 1986 onwards, the air cleaner is
thermostatically-controlled by a vacuum
operated system to provide air at ...