Suspension and steering
The independent front suspension is of the MacPherson strut type, incorporating coil springs and integral telescopic shock absorbers. Lateral location of each strut assembly is by a forged or pressed steel lower suspension arm containing rubber inner mounting bushes and incorporating a balljoint at their outer ends.
See also:
Rear suspension/final drive unit rear mounting (Saloon, Hatchback and Estate
models) - renewal
Note: From May 1986, revised rear
suspension/final drive unit rear mounting bolts
have been used in production. Whenever the
earlier type of bolts are removed, they should
be discarded and the lat ...
Ignition system component check (Every 24 000 miles (40 000 km) or 2 years)
1 Before disturbing any part of the ignition
system, disconnect the battery negative lead.
2 Identify and clearly mark all HT leads before
disconnecting them from the spark plugs.
3 Refer to the a ...
Load apportioning valve (P100 models) - adjustment
Models before mid-April 1989
1 The vehicle must be unladen, at normal
kerb weight (a full tank of petrol, but no driver
or load).
2 With the vehicle standing on its roadwheels,
remove the spring ...
