Radiator grille - removal and refitting
Pre-1988 models
Removal
1 The grille is held in position by four spring
clips (see illustration).
10.1 Radiator grille spring clip - pre-1988 models
2 Once these clips are released, the grille can be removed from the body panel.
Refitting
3 Refit by reattaching the spring clips.
1988 models onwards
4 The radiator grille is integral with the
bumper moulding, and is removed with the
bumper.
See also:
Cylinder head - removal and refitting (engine removed)
Note: Up to early 1984, splined type cylinder
head bolts were used, and from early 1984,
size T55 Torx bolts were used. Torx type bolts
must always be renewed after slackening. The
two types of bo ...
Exhaust system check (Every 12 000 miles or 12 months)
With the vehicle raised on a hoist or
supported on axle stands (see “Jacking and
Vehicle Support”), check the exhaust system
for signs of leaks, corrosion or damage and
check the rubber mountings ...
Waste gate solenoid control valve - removal and refitting
Removal
1 The solenoid control valve is mounted on a
bracket located underneath the ignition
distributor (see illustration).
21.1 Waste gate solenoid control valve location (arrowed)
2 Disconne ...