Boot lid (Cabriolet models) - removal and refitting
Removal
1 Open the boot and prop it open using a
length of wood.
2 Pull out the clips securing the gas strut and remove the strut.
3 Working inside the boot, undo the nuts securing the hinge assemblies to the framework.
4 Ease the lid rearwards to disengage the studs, and lift the lid away.
5 The hinge assemblies can be removed from the lid by prising off the plastic covers and undoing the bolts securing the hinges to the lid. One is accessible from outside and one from inside.
Refitting
6 Refitting is a reversal of removal, but do not
fully tighten the bolts until the lid has been
lined up and closed properly.
See also:
Automatic transmission operation (if equipped)
Brake-shift interlock
This vehicle is equipped with a brake-shift interlock feature that prevents
the gearshift lever from being moved from P (Park) unless the brake pedal is
depressed. If you can ...
Cylinder head - removal and refitting (engine in vehicle)
Note: Refer to the warning at the beginning of
Section 5 and the note at the beginning of the
following Section before proceeding. The
cylinder head must not be removed when the
engine is warm.
R ...
Handbrake lever - removal and refitting
Removal
1 Chock the front wheels, raise and support
the vehicle at the rear using stands (see
“Jacking and Vehicle Support”) then release
the handbrake.
2 Working underneath, extract the spring c ...
