Glove compartment - removal and refitting
Pre-1986 models
Removal
1 Open the glovebox lid and extract the
screws which hold the glovebox to the facia.
2 Remove the latch (two screws).
3 Remove the single screw inside the top of the glove compartment which holds it to the moulded bracket. Withdraw the glove compartment.
Refitting
4 Refitting is a reversal of removal.
1986 models onwards
Removal
5 Undo the two screws and remove the glove
compartment lid.
6 Remove the latch (two screws) and disconnect the lamp wiring (where fitted).
7 Undo the three screws and remove the glove compartment.
Refitting
8 Refitting is a reversal of removal.
See also:
Starting and charging systems
The engine electrical system includes all charging, starting and
ignition system components and the engine oil pressure sensor. ...
Battery - testing and charging
Note: Refer to the precautions at the end of
Section 1 before proceeding.
Standard and low maintenance
battery - testing
1 If the car covers a small annual mileage it is
worthwhile checking the s ...
Front suspension strut - removal, overhaul and refitting
Removal
1 Slacken the roadwheel bolts, raise the front
of the vehicle and support it securely on
stands (see “Jacking and Vehicle Support”),
then remove the roadwheel.
2 Support the underside of ...