Clock - removal and refitting
Facia mounted clock
Removal
1 Remove the instrument panel (Section 9).
2 Undo the screws around the edge of the instrument panel at the rear and separate the two panel halves.
3 Undo the nuts and remove the clock.
Refitting
4 Refitting is a reversal of removal.
Roof mounted clock
Removal
5 Disconnect the battery negative terminal.
6 Extract the two screws which hold the clock to the header panel.
7 Disconnect the clock and courtesy lamp wiring plug.
8 Detach the lamp from the clock.
Refitting
9 Refit by reversing the removal operations.
Once the battery is reconnected, the time must be re-set.
See also:
Hydraulic pipes and hoses - renewal
Note: Before starting work, refer to the
warning at the beginning of Section 3
concerning the dangers of hydraulic fluid.
1 Always disconnect a flexible hose by
prising out the spring anchor clip ...
Electric window components - removal and refitting
1 Disconnect the battery negative lead.
Switches
2 Prise the switch from its location using a
thin-bladed screwdriver, and disconnect the
wiring plug (see illustration).
49.2 Disconnecting the ...
Battery - removal and refitting
Note: Refer to the precautions at the end of
Section 1 before proceeding.
Removal
1 The battery is located on the left-hand side
of the engine compartment on a bulkhead
platform.
2 Disconnect th ...
