Windscreen/tailgate wiper blades and arms - removal and refitting
Removal
1 Pull the wiper arm away from the glass until
the arm locks.
2 Depress the small clip on the blade and slide the blade out of the hooked part of the arm (see illustration).
17.2 Disconnecting wiper blade from arm
3 Before removing the wiper arms it is worthwhile marking their parked position on the glass with a strip of masking tape as an aid to refitting. Raise the plastic nut cover.
4 Unscrew the nut which holds the arm to the pivot shaft and pull the arm from the splines.
Refitting
5 Refit by reversing the removal operations.
See also:
Cooling, heating and ventilation systems
The cooling system is of the pressurised pump-assisted thermo-syphon
type. The system consists of the radiator, water pump, thermostat, electric
cooling fan, expansion tank and associated hoses. ...
Radiator fan thermal switch - testing, removal and refitting
Testing
1 The thermal switch is located on the side of
the thermostat housing on early OHV engine
models and in the thermostat housing cover
on later OHV versions. On all CVH engines, the
switch ...
Transmission fluid
Checking automatic transmission fluid
Refer to your scheduled maintenance guide for scheduled intervals for
fluid checks and changes. Your transaxle does not consume fluid.
However, the fluid lev ...