Tailgate wiper motor - removal and refitting
Removal
1 Disconnect the battery and remove the
wiper arm/blade assembly.
2 Remove the pivot shaft nut, spacer and outer seals.
3 Open the tailgate and remove the trim panel (refer to Chapter 11).
4 Release the earth lead and unscrew the two, or on later models, three wiper motor mounting bolts (see illustration).
19.4 Tailgate wiper motor retaining bolts (arrowed)
5 Disconnect the multi-pin plug and remove the motor from the tailgate.
6 Take off the pivot shaft seal, spacer and bracket from the motor.
Refitting
7 Refit by reversing the removal operations.
See also:
Hinge and lock check and lubrication (Every 12 000 miles or 12
months)
1 Work around the vehicle, and lubricate the
bonnet, door and tailgate hinges with a light
machine oil such as Duckhams Home Oil.
2 Lightly lubricate the bonnet release
mechanism and exposed secti ...
Idle speed compensator - removal and refitting
Removal
1 The idle speed compensator is only fitted to
K-Jetronic systems from 1986 onwards and is
located in the centre of the engine
compartment bulkhead (see illustration).
19.1 K-Jetronic s ...
Front suspension crossmember - removal and refitting
Removal
1 Remove the steering gear.
2 Support the engine with a jack and
interposed block of wood under the sump.
3 Unscrew and remove the engine mounting
nuts from the top of the mountings in th ...