Heated rear window aerial amplifier - removal and refitting

Removal
1 On some 1986 models onwards the radio aerial is incorporated in the heated rear window element, and to assist reception an amplifier is fitted. This is located in the tailgate adjacent to the tailgate wiper motor. Removal and refitting is as follows.

2 Remove the tailgate wiper motor trim panel and the adjoining trim panel.

3 Undo the two screws and withdraw the amplifier.

4 Disconnect the wiring and remove the amplifier.

Refitting
5 Refitting is a reversal of removal.

    See also:

    Aerial - removal and refitting
    Manually-operated type - all models except Cabriolet Removal 1 Withdraw the radio (Section 21) until the aerial lead can be pulled out of the receiver socket. 2 Working under the front wing, rel ...

    Seat belts - removal and refitting
    Front belt - 3-door models Note: Note the fitted sequence of any plates, washers and spacers when unbolting the seat belt anchors. Removal 1 Slide the belt stalk cover upwards to expose the anch ...

    Tailgate lock (Hatchback and Estate models) - removal and refitting
    Removal 1 Open the tailgate and prise out the trim panel using a wide-bladed screwdriver (see illustration). 12.1 Tailgate trim panel fixings - Hatchback and Estate models 2 Remove the lock bar ...