Diagram 3: 1980-86 Ancilliary circuits all models
Diagram 3: 1980-86 Ancilliary circuits all models
See also:
Rear hub bearings - adjustment
Note: A new hub nut split-pin must be used
on refitting.
1 Raise and support the rear of the vehicle on
stands. Release the handbrake.
2 This adjustment will normally only be
required if, when th ...
Fuel cut-off (inertia) switch - removal and refitting
Removal
1 The fuel cut-off switch is located in the
luggage compartment, under the spare wheel
(see illustration).
18.1 Fuel cut-off (inertia) switch location (arrowed) - 1.4 CFI engine
A Reset ...
Engine dismantling, examination, renovation and reassembly - general
information
1.8 litre (R2A type)
Dismantling
1 It is best to mount the engine on a
dismantling stand, but if this is not available,
stand the engine on a strong bench at a
comfortable working height. Failing ...