Diagram 4b: 1986-on KE-Jetronic fuel injection
Diagram 4b: 1986-on KE-Jetronic fuel injection For starting and charging
circuits see Diagram 1a
See also:
Rear roadspring (Saloon and Estate models) - removal and
refitting
Removal
1 Raise the rear of the car and support it on
stands (see “Jacking and Vehicle Support”).
Remove the roadwheel.
2 Support the suspension lower arm by
placing a jack beneath the spring sea ...
Throttle position sensor - removal and refitting
Note: During this procedure ensure that the
sensor wiper is not rotated beyond its normal
operating arc.
2.0 litre SOHC models
1 Disconnect the battery negative lead.
2 Free the throttle position ...
Distributor (OHC models) - removal and refitting
Note: During production the engine ignition
timing is accurately set using a microwave
process, and sealant is applied to the
distributor clamp bolt. Removal of the
distributor should be avoided e ...