Method of engine removal

Warning: Vehicles equipped with air conditioning:
Components of the air
conditioning system may
obstruct work being undertaken on the engine, and it is not always possible to unbolt and move them aside sufficiently, within the limits of their flexible connecting pipes. In such a case, the system should be discharged by a Ford dealer or air conditioning specialist. The refrigerant is harmless under normal conditions, but in the presence of a naked flame (or a lighted cigarette) it forms a highly toxic gas. Liquid refrigerant spilled on the skin will cause frostbite. If refrigerant enters the eyes, rinse them with a diluted solution of boric acid and seek medical advice immediately.

The engine may be lifted out either on its own, or together with the manual gearbox/automatic transmission. Unless work is to be carried out on the manual gearbox/automatic transmission, it is recommended that the engine is removed on its own. Where automatic transmission is fitted, the engine should where possible be removed on its own due to the additional weight of the transmission.

    See also:

    Speed control (if equipped)
    With speed control set, you can maintain a speed of 48 km/h (30 mph) or more without keeping your foot on the pedal. Speed control does not work at speeds below 48 km/h (30 mph). Do not use the spe ...

    Starter motor - removal and refitting
    Removal 1 Disconnect the battery. 2 Working from under the vehicle, disconnect the main starter motor cable and the two wires from the starter solenoid (see illustration). 8.2 Disconnecting th ...

    Mixture (CO) adjustment potentiometer - removal and refitting
    Removal 1 The potentiometer is located on the side of the left-hand suspension turret (see illustration). 17.1 Mixture (CO) adjustment potentiometer (arrowed) - 1.6 EFI engine 2 Disconnect the ...